Laboratory Press

Our PLC-controlled hydraulic laboratory vulcanizing press allows for the highest quality sample production. Operating on 220 VAC, it can be plugged into a standard outlet and used in any environment. Our precision PID heating system ensures top-quality rubber and silicone sample production. Designed for mass production, our laboratory rubber press combines high hydraulic power and low energy consumption. With its automatic degassing function and analog pressure measurement, we offer all the features required in a professional press at an affordable price. Our Laboratory Press can produce rubber and silicone test samples, and cutting operations can also be performed by turning off the heaters.

Thanks to its low electricity consumption and 220 VAC operation, mass production is possible in any environment. An active ventilation system removes excess heat and gases from the machine. Because the entire hydraulic system, heating, and position sensing systems are controlled by a PLC, it is also suitable for continuous operation. Even at home, it can be plugged into an outlet and used for mass production of large quantities of silicone or rubber products.

With our laboratory vulcanization machine you can produce rubber and silicone samples for the following tests.

Test / Analysis Name	Test Standards Used
Ozone Aging Test	ASTM D 1149, ISO1431-1, ISO1431-2
Taber Abrasion Resistance Determination	ASTM D3884, TS 8103 EN ISO 5470
Oxygen Permeation Rate Determination	ASTM D3985, ISO 15105, ASTM F-1927, ASTM F-1307
Determination of Vicat Softening Temperature	TS EN ISO 306, ASTM D1525
Determination of Bending Temperature Under Heat and Load (HDT)	ISO 75, ASTM D648
Melt Flow Rate Determination (MFR)	TS EN ISO 1133, ASTM D1238
Light Fastness Test with Fluorescent UV Lamp	ISO 4892-3, ISO 11507-A, ISO 11507-B, ISO 11997-2, GSB AL 631, EN 927-6, ASTM G154, ASTM G151, ASTM D4587, ASTM D4329, ASTM D4799, ASTM D5208, SAE J2020
Determination of Burning Rate in Horizontal Position	ASTM D5132, ISO 3795, DIN 75200, FMVSS 302, SAE J369, JIS D1201, AU 169
Light Fastness Test with Xenon Lamp	ASTM D2565, D6695 ISO 4892-1, SAE J2412, J2527, Fiat 50451, Renault D27 911
Weathering Test	TS ISO 188 (Method B), ASTM D573‐04 DIN 53508
Shore D Hardness Determination	ASTM D2240, ISO 7619-1, ISO 868
Shore A Hardness Determination	ASTM D2240, ISO 7619-1
Determination of Inorganic Filler Percentage (Ash) in Plastics	ISO 3451-1, ASTM D5630
Sample Preparation	ISO 2818, ASTM D6110, ASTM D256, ISO 527-3 Tip-1B, ISO 179-1, ISO 180, ISO 8256, ISO 75-2, ASTM D648, ASTM D790, ISO 527-2 Tip-1B, ISO 3167 Type-A, ISO 178
Density Determination in Plastics	TS EN ISO 1183-1

Laboratory Press

Table Size	260mm X 260mm
Compression Force (250 Bar)	35 Tons
Motor Power (kW)	1,5 kW
Table Heating Power (kW)	1,5 kW
Electricity Requirement	220 VAC / 3 kW (Can be operated by plugging into a standard socket.)
Number of Cylinders	1
Cylinder Diameter	130
Machine Weight	320 kg
Machine Dimensions	66cm X 68cm X 98cm
Stroke	150 mm
Maximum Clearance	170 mm
Minimum Clearance	20 mm
Closing Speed	6 mm/sec.
Automatic Degassing	All details can be adjusted via PLC.
Temperature Control	Temperature control is provided with PID and Direct control options.
Control Unit	All functions and measurements are controlled by PLC.
Control Panel	4.1” Panel and keypad.
Ventilation	Harmful gases and excess heat are removed from the environment with upper fans.

BURSAMAK MACHINE LTD
Yaylacık mh. 44. sk. No:13 16280 Nilüfer / BURSA /TURKEY
+90 224 3611940-41 info@bursamak.com